Notifications in UI NAV 2017

Hi All,

Notifications provide a programmatic way to send non-intrusive information to the user interface (UI) in the Dynamics NAV Web client. Notifications differ from messages initiated by the MESSAGE function. Messages are modal, which means users are typically required to address the message and take some form of corrective action before they continue working. On the other hand, notifications are non-modal. Their purpose is to give users information about a current situation, but do not require any immediate action or block users from continuing with their current task. For example, you could have a notification that a customer's credit limit is exceeded.


Notifications in the UI :

In the UI, notifications appear in the Notification bar (similar to validation errors) at the top of the page on which a user is currently working. The user can then choose to dismiss the notification, which clears it. Or if actions are defined on notification, the user can choose one of the actions.

• There can be multiple notifications. The notifications appear chronological order from top to bottom.
• Notifications remain for duration of the page instance or until the user dismisses them or takes action on them.
• Notifications that are defined on sub-pages, for example in parts and FactBoxes, appear in the same Notification bar.
• Validation errors on the page will be shown first.

Notifications in the development environment :

By using the Notification and NotificationScope data types and functions in C/AL, you can add code to send notifications to users. The following table provides an overview of the available functions. The sections that follow provide additional information about how to create notifications.

Function	Description
MESSAGE	Specifies the content of the notification that appears in the UI.
SCOPE	Specifies the scope in which the notification appears.
SEND	Sends the notification to be displayed by the client.
ADDACTION	Adds an action on the notification.
SETDATA	Sets a data property value for the notification
GETDATA	Gets a data property value from the notification.
RECALL	Recalls a sent notification.

Creating and sending a notification:

You create a notification by using the MESSAGE and SEND functions. The MESSAGE function defines the message part of the notification. When the SEND function is called, the notification is sent to the client and content of the message is displayed.

MyNotification.MESSAGE := 'This is a notification';
MyNotification.SEND;

The SEND function call should be the last statement in the notification code, after any ADDACTION or SETDATA function calls for the notification instance.

Defining the notification scope :

The scope is the realm in which a notification is broadcast in the client. There are two different scopes: LocalScope and GlobalScope.

• A LocalScope notification appears in context of the user's current task, that is, on the page the user is currently working on. LocalScope is the default.
• A GlobalScope notification is not directly related to the current task. Note:GlobalScope is currently not supported, so do not use it. This will be implemented in a future release.

The following code creates a notification in the LocalScope:

MyNotification.MESSAGE := 'This is a notification';
MyNotification.SCOPE := NOTIFICATIONSCOPE::LocalScope;
MyNotification.SEND;

Adding actions on a notification :

You add actions on notifications by using the ADDACTION function. This function provides a way for you to create interactive notifications. By default, users have the option to dismiss the notifications. However, there might be cases where you want to provide users with different actions that they can take to address the notification, like opening an associated page for modifying data.

Conceptually, a notification action calls a function in a specified codeunit, passing the notification object in the call. The function includes the business logic for handling the action.

MyNotification.MESSAGE := 'This is a notification';
MyNotification.SCOPE := NOTIFICATIONSCOPE::LocalScope;
MyNotification.ADDACTION('Action 1',CODEUNIT::"Action Handler",'RunAction1');
MyNotification.ADDACTION('Action 2',CODEUNIT::"Action Handler",'RunAction2');
MyNotification.SEND;

The basic steps for adding an action are as follows:

1. Create a global function in a new or existing codeunit. The function must have a Notification data type parameter for receiving the notification object.
2. Add C/AL code to the function for handling the action.
3. Specify the codeunit and function in the ADDACTION function call.

Important

You can have more than one action on a notification. A LocalScope notification can have up to 3 actions. A GlobalScope notification can have up to 2 actions.

Sending data with a notification :

You use the SETDATA and GETDATA functions to add data to a notification, which is typically needed when actions are invoked. The SETDATA function sets, or adds, data to the notification. The data is defined as text in a key-value pair. With the GETDATA function, you can then retrieve the data again.

The following code sets data for a notification:

MyNotification.MESSAGE := 'This is a notification';
MyNotification.SCOPE := NOTIFICATIONSCOPE::LocalScope;
MyNotification.SETDATA('Created',FORMAT(CURRENTDATETIME,0,9));
MyNotification.SETDATA('ID',FORMAT(CREATEGUID,0,9));
MyNotification.ADDACTION('Action 1',CODEUNIT::"Action Handler",'RunAction1');
MyNotification.ADDACTION('Action 2',CODEUNIT::"Action Handler",'RunAction2');
MyNotification.SEND;

The following code gets the data for a notification:

DataValue := MyNotification.GETDATA('Created');
DataValue := MyNotification.GETDATA('ID');

Example :

This simple example illustrates how notifications work and provides some insight into how you can use them. This example uses page 42 Sales Order of the CRONUS International Ltd. demonstration database according to the following.

• The code compares a customer's balance with their credit limit. If the balance exceeds the credit limit, a notification is sent to the client.
• The notification includes an action, which has the caption Change credit limit, that opens page 21 Customer Card. This enables the user to increase the credit limit.

To complete the example, follow these steps:

1. In C/AL code for page 42 Sales Order, add the following variables and text constants:

   Variable Name	Data Type	Subtype
   Customer	Record	Customer
   CreditBalanceNotification	Notification
   OpenCustomer	Text

   Text Constant Name	ConstValue
   Text003	The customer's current balance exceeds their credit limit.
   Text004	Change credit limit

2. Add the notification code on page 42 Sales Order.
   For this example, add the code on OnOpenPage tigger in C/AL .

   Customer.GET("Sell-to Customer No.");
   IF Customer."Balance (LCY)" > Customer."Credit Limit (LCY)" THEN
   BEGIN
    //Create the notification
    CreditBalanceNotification.MESSAGE(Text003);
    CreditBalanceNotification.SCOPE := NOTIFICATIONSCOPE::LocalScope;
    //Add a data property for the customer number
    CreditBalanceNotification.SETDATA('CustNumber', Customer."No.");
    //Add an action that calls the Action Handler codeunit, which you define in the next step.
    CreditBalanceNotification.ADDACTION('Text004', CODEUNIT::"Action Handler", OpenCustomer);
    //Send the notification to the client.
    CreditBalanceNotification.SEND;
   END
   

3. Create a codeunit, called Action Handler, for handling the notification action as follows:
   • Add a global function called OpenCustomer that has a Notification data type parameter called CreditBalanceNotification for receiving the Notification object.
   • Add the following C/AL variables to the codeunit:

     Variable Name	Data Type	Subtype
     CustNumber	Text
     CustNo	Text
     CustRec	Record	Customer
     CustPage	Page	Customer Card

   • Add the following code to the OpenCustomer function:

     //Get the customer number data from the SETDATA call.
     CustNo := CreditBalanceNotification.GETDATA(CustNumber);
     // Open the Customer Card page for the customer.
     IF CustRec.GET(CustNo) THEN BEGIN
      CustPage.SETRECORD(CustRec);
      CustPage.RUN;
     END ELSE BEGIN
       ERROR('Could not find Customer: ' + CustNo);
     END;

Thanks & Regards,
Nandesh Gowda